塑料片板材擠出設備介紹（汽車類）
2018/2/5 20:51:23 點擊：
塑料片板材擠出設備介紹（汽車類）
TPO、TPU片材擠出生產線
TPO、TPU Sheet Extrusion Line
采用熱塑性聚烯烴彈性體TPO為原料，經過擠出壓延工藝而制成的新型TPO汽車儀表板表皮具有優異的耐老化性和尺寸穩定性、以及耐化學腐蝕性、耐臭氧、耐熱耐寒性、耐油脂性、無VOC排放，是行業大力推廣的優秀環保的汽車內飾材料。
產品厚度0.5-3mm，寬度1000-2000mm。
熱塑性聚氨酯TPU同樣可應用于汽車儀表板表皮。
Using TPO as material to produce the surface leather of automible dashboard by extrusion line, the leather has good charateristics of anti-aging and dimentional stability, anti-corrosion, ozone resistance, heatproof, cold resistance, grease resistance and no VOC discharge, it has been widely used as the excellent environmental prection automible internal decorative material.
TPO sheet thickness 0.5-3mm, width 1000-2000mm.
Another thermoplastic elastomer TPU leather can be also used as the surface of automible dashboard.
.jpg)
HDPE板材擠出生產線
HDPE Plate Extrusion Line
上海金緯提供的先進螺桿擠出系統，適用于熔指更低、強度更高的高分子量聚乙烯HMW-HDPE, 板材主要用于汽車車廂、皮卡貨箱內襯、汽車貨箱頂蓋及防雨棚等。在保證板材同等強度的情況下可減少30%以上的產品厚度，為客戶大幅降低材料成本。
產品厚度2-12mm，寬度2000-3000mm。
Shanghai Jwell supply advanced extrusion system, it is suitable to produce HMW-HDPE material which have low MFI and high-strength into plate, the plates are mainly used to produce auto carriage board, pick-up's box liner, cover of truck, anti-rain cover etc. The plate thickness can reduce more than 30% when it has same impact strength, it reduce the production cost for manufacturers.
Plate thickness 2-12mm, width 2000-3000mm.
.jpg)
TPU、ABS復合板材生產線
TPU、ABS Composit Plate Extrusion Line
TPU/ABS復合板材是一種用于汽車儀表板、內飾的環保新材料，采用模內復合工藝，區別于傳統膠粘的TPU/ABS復合方式，制品不散發甲醛、無異味，不會造成車內二次污染。
厚度在1-8mm，寬度在1200-2000mm。
TPU/ABS composit plate is one new kind of envioment friendly material used for car gauge panel and inner decoration. It adopts muti manifold procee to make TPU coat on ABS instead of glue coating so that the finished product does not release formaldehyde or create inner air pollution. Plate thickness from 1mm to 8mm, width from 1200mm to 2000mm.
.jpg)
汽車隔音墊（阻尼止震墊）生產線
Car Sound Insultation Pad (Vibration Damping Pad) Extrusion Line
汽車隔音墊（阻尼止震墊）是采用EVA、TPO、PVC等原料， 加高填充無機物制成的高密度片材。使用時貼在鈑金上，可以從源頭制止噪音的產生，并隔絕金屬對聲音的傳導。主要應用于汽車的車身機蓋、車門、后備艙、車頂、翼子板等位置。還能起到加強、隔熱效果。
厚度0.6-8mm，寬度1000-3000mm。
Car Sound Insulation Pad (Vibration Damping Pad) is made of EVA, TPO, PVC and high filling inorganic. It is placed directly on the metal part, which eliminates the noise from the source and avoid the noise transmission in the metal. It is mainly used in car cover, door, luggage room, top part, fender part, which also help to improve the strength and heat insuitation.
regular thickness is from 0.6 to 8mm and width from 1000 to 3000mm.
.jpg)
PVC、TPO、POE地板革生產線
PVC、TPO、POE Floor Leather Extrusion Line
上海金緯提供多種不同地板革設備，可用于生產PVC地板革、TPO地板革、POE地板革等產品。
產品厚度1-3mm，寬度2000-3000mm。
地板革具有耐磨、耐腐、防滑、防滲、阻燃的性能，廣泛用于機車（汽車、高鐵）、賓館、酒店、娛樂廳、展館、家庭等。
Shanghai Jwell supply different types plastic floor extrusion lines for producing PVC floor, TPO floor,POE floor, etc.
The product thickness is 1-3mm,width is 2000-3000mm.
It has the performance of anti-friction, corrcsion resistence, skid resistence, impermeable and inflaming retarding. It is widely used on auto (automobile and high spead train), hotel, amusement place, exhibition hall, house, etc.
.jpg)
PP木粉/竹粉/麻纖維板材生產線
PP & Wood Powder、Bamboo Powder And Fiber Composite Sheet Extrusion Line
PP+木粉、PP+麻纖維復合片材生產線， 采用錐形雙螺桿擠出機擠出，配以特殊工藝手段，是金緯推出的又一個國內領先的生產線機組。此復合片材具有深成型、深拉伸，與各種面料一次熱壓成型復合的制品，邊角余料可回收利用等特點，被廣泛應用于高檔汽車內飾件、頂棚、后擱物板、行李箱基材及賓館、餐廳、娛樂場所的裝潢。
This production line adopts conical twin-screw extruder, with specially processing method, which is another most advanced technology in China. This product features of well-shaped, easily processed, recycling and reuse of the off outting once-complexion with other material of sheet by hot pressing. It can be widely applied in the decoration of auto-mobile ornaments, ceiling, booth, suitcase, hotel, restaurant, entertainment area and etc.
.jpg)
PP蜂窩板生產線
PP Honeycomb Board Extrusion LIne
PP蜂窩板通過擠出法一次成型的三層夾心板材，兩面為較薄的面層，中間為蜂窩狀結構；根據蜂窩的結構可以分為單層板、雙層板。
PP蜂窩板也可一次成型雙面貼布、覆皮，具有輕質高剛、無毒環保減震耐寒、隔音保溫、防潮隔熱等優點。
PP蜂窩板的主要規格：厚度2-12mm，寬度800-1300mm。
PP honeycomb board, through extrusion method made three layers sandwich board of one time forming, two sides is thin surface, middle is honeycomb structure;According to honeycomb structure can divide into single layer、double layer board.
PP honeycomb board also can one time forming, coat fabric at two sides、leather, with light weight and high strength、non-toxic, environment, shake absorption and cold-resistant、soudproof & heat pressrvation、mois-tureproof & heat insulation etc. advantage.
PP honeycomb board main specification:2-12mm thickness, 800-1300mm width.
1、 應用于乘用車的行李箱蓋板、行李箱隔板、行李箱地毯基板、側圍裝飾板、頂棚等內飾部位；
- Used for car trunk cover board、trunk clapboard、trunk carpet substrate、side wall decortation board、 ceiling etc. interior place.
2、應用于制作各種高強度包裝箱。
2. Used for manufacturing different kinds of high strength packing box.
.jpg)
PVB薄膜生產線
PVB Film Extrusion Line
PVB （聚乙烯醇縮丁醛）薄膜是一種熱塑性樹脂膜，是由PVB樹脂加增塑劑生產而成。廣泛應用于建筑夾層玻璃，汽車夾層玻璃，太陽能光伏玻璃，防彈玻璃，隔音玻璃等。具有很好的安全性，防止玻璃由于外力作用下破碎而碎片濺起傷人；具有隔音性，防紫外線，可以做成彩色或高透明的，應用于建筑幕墻玻璃已有70年歷史；具有光學應用價值，可應用太陽能光伏。PVB薄膜目前有輥筒成型、過水成型兩種方式生產，可生產厚度0.38-1.52mm，寬度500-3400mm的透明、彩條、全彩薄膜。
PVB film is a thermo-plastic film made of PVB resin and plasticizer. It is widely used for interlayer of construction glass, automobile, solar photovoltaic glass, bullet-proof glass, sound proof glass, etc. Features high safety, sound proof, ultraviolet-proof, and can be colorful or super transparent, and used for construction wall glass for more than 70 years. Also itis of Optical application value, and solar photovoltaic as well.There are two types of production method: by roller forming and water cooling forming, the thickness of final product will be 0.38-1.52mm, width will be 500-3400mm, transparent, color strip and full color film are optional.
.jpg)
- 上一篇：冬季設備保養須知，來自金緯機械溫馨提醒！ 2018/2/5
- 下一篇：洛氏硬度、布氏硬度等硬度對照表和換算方法 2015/5/2